Equipment

DE-1008.5

Harvest Rates up to 8.5 Tons per Minute (510 Ton per Hour)

  • Stainless Steel Baseplate and Enclosure
  • Hinged Door Pump Access with 1/4” Turn Latches
  • Low Application Rate
  • Easy to Clean
  • 10 Gallon Insulated Cooler
  • No Nozzle or Orifice to Plug
  • Quick Connect Pump Tube in 2 Different Sizes
  • Quick Connect Hoses on Flush Bottle and Cooler Valve Assembly
  • Large 32 oz Flush Bottle
  • Weather-tight Electrical Connection
  • KIT-SS-25

    25 Gallon Kit for Small Square Balers

    Includes:

  • DE-25 Small Square Applicator (Tank Dims: 33L x 19.5W x 22H)
  • NTA-SS Nozzle Tube Assembly for Small Square Balers
  • Self-Fill System
  • SP-1 Control*
  • KIT-RB-55

    55 Gallon Kit for Most Round Balers

    Includes:

  • DE-55 Round Baler Applicator (Tank Dims: 38L x 23W x 32H)
  • NTA-LS/RB Nozzle Tube Assembly for Round Balers
  • Deluxe Self-Fill System
  • SP-1 Control*
  •  

    DE-55

    Dimensions: Tank & Frame: 38”L x 23”W x 32”H
    Pump Unit: 15”H x 15”W x 6.5”D

  • 55 Gallon Tank and Frame
  • 3.0 GPM Self Priming Pump
  • Pre-terminated 37’ Power Cord Assembly
  • Pressure Regulation System w/ Stainless Steel Gauge
  • On-Off Switch
  • 3-Nozzle Assembly with 20’ Hose
  • 4” In-Line Gauge
  • Deluxe Self-Fill System
  • DE-25

    Dimensions: 33”L x 19.5”W x 22” H

  • 25 Gallon Tank w/ Flat Surface Mounting Brackets
  • 2.0 GPM Self Priming Pump
  • Pre-terminated 37’ Power Cord Assembly
  • Pressure Regulation System w/ Stainless Steel Gauge
  • On-Off Switch
  • 2-Nozzle Assembly with 20’ Hose
  • Self-Fill System
  • DE-9

    Pump without tank and frame – Use with an existing tank or draw from a barrel mount

  • 3.0 GPM Self Priming Pump
  • Pre-terminated 37’ Power Cord Assembly
  • Pressure Regulation System w/ Stainless Steel Gauge
  • On-Off Switch
  • 3-Nozzle Assembly with 20’ Hose
  • 4” In-Line Gauge
  • Deluxe Self-Fill System
  • DE-7

    Pump without tank and frame – Use with an existing tank or draw from a barrel mount (Not recommended for Large Square)

  • 2.0 GPM Self Priming Pump
  • Pre-terminated 37’ Power Cord Assembly
  • Pressure Regulation System w/ Stainless Steel Gauge
  • On-Off Switch
  • 2-Nozzle Assembly with 20’ Hose
  • DE-8

    Ideal for Forage Blowers and Baggers (Stationary) 

    Features:

  • Hangs on the side of a 55 Gallon Drum
  • 2.0 GPM Self-Priming Pump
  • 15’ Power Cord with Battery Clips
  • Single Nozzle Assembly (4-72 oz. per minute) w/ 20 ft Hose
  • On-Off Switch Mounted on Applicator
  • TS-5 Transfer Unit (5.0 Gallons Per Minute)

    TS-7 Transfer Unit (7.0 Gallons Per Minute)

    Both Units Feature:

  • 12 Volt Self-Priming Pump with Pressure Switch
  • Hangs on the side of a Tote or 55 Gallon Drum
  • 15’ Power Cord with Battery Clips
  • 15’ of Discharge Hose with Nozzle Valve
  • On-Off Switch Mounted on Applicator
  • Full Product Catalog